Programming Of M-Bus Address (Optional); Radio (Optional) - Zenner zelsius C5-ISF Montage- Und Bedienungsanleitung

Programming of M-Bus address
(optional)
Select of the display „Adr 000" in
■
level 3 (same for the additional
inputs „Adr1" to „Adr3").
Press the button for about 2
■
seconds
(until the door symbol reappears)
and then release. The right digit
starts flashing. With one short push
the value of the digit is incre-
mented.
With each long press, the selected
■
value will be taken over and change
to next digit (as soon as desired
character flashes, release the but-
ton).
If the desired value is reached, you
■
have to press the button until the
number stops flashing and the re-
turn to the menu is completed. Now
the new value is programmed.
The programming process can be
■
repeated if necessary.
Note: If the editor is not terminated,
maybe changed values are being saved
after the automatic return to the main
display.
24

Radio (optional)

General information
zelsius®C5-energy meters which have
an integrated radio interface with an
antenna are marked for better visibility
on the upper cover with one of the fol-
lowing symbols:
wM-Bus
®