Standard Accessories; Optional Accessories - Hitachi WH 14 Bedienungsanleitung

English
PRECAUTIONS ON USING IMPACT WRENCH
1. When using the tool at a hight, make sure that there
is nobody below.
2. Use earplugs if using for a long time use.
3. Switch the reversing switch only after the motor
has stoped when it is necessary to change the
direction of the rotation.
4. Use a step up transformer when a long extension
cable is used.
SPECIFICATIONS
Model
Voltage (by areas)*
Power input*
No load speed
Capacities (size of bolts)
Tightening torque**
Angle drive
Weight (without cord)
* Be sure to check the nameplate on product as it is subject to change by areas.
** Tightening the bolt without extension cord at rated voltage.

STANDARD ACCESSORIES

WH14, WH16:
Side handle ..................................................................... 1
WH22:
(1) Side handle ............................................................... 1
(2) Hex. socket 32 mm ................................................. 1
(3) Case ........................................................................... 1
Standard accessories are subject to change without notice.
4
WH14
(110V, 115V, 120V, 127V, 220V, 230V, 240V)
360W
2100/min
M10-M16
(Ordinary bolt)
Maximum 20 kg-m
(tightening M16 F10T)
12.7 mm
2.3 kg
5. Confirm the tightening torque by a torque wrench
before use in order to assertain the correct tightening
torque to be used.
6. Assemble the socket securely to the impact wrench
with the socket pin and ring.
7. Confirm whether the socket has any cracks in it.
8. Always hold the body and side handles of the
impact wrench firmly. Otherwise the counterforce
produced may result in inaccurate and even
dangerous operation.
WH16
440W
1700/min
M16
(High tensile bolt)
M12-M20
(Ordinary bolt)
Maximum 30 kg-m
(tightening M16 F10T)
12.7 mm
2.9 kg

OPTIONAL ACCESSORIES

(sold separately)
1. Variety of sockets
Although the Hitachi Impact Wrench is delivered
with only one standard socket, ample sockets are
available to cover impact tightening of various sizes
and types of bolts.
S
WH22
850W
1600/min
M16-M22
(High tensile bolt)
M14-M24
(Ordinary bolt)
Maximum 60 kg-m
(tightening M22 F10T)
19 mm
5 kg
L
E