Check The Circuit Breaker In The Charging Station; Storage And Maintenance - ZAPTEC Pro Bedienungsanleitung

English

4 . Check the circuit breaker in the charging station

1. Removethe front cover using the SmartKey* special tool supplied with the charging
station, and take the front cover off.
2. Check that the circuit breakers in the circuit breaker window have not tripped (they
should all face upwards).
3. If any of the circuit breakers have tripped, remove the circuit breaker cover using
the snap cover and flip the circuit breakers up again. Fit the circuit breaker cover as
in step two and clip the cover into place.
* If the charging station is mounted on a Zaptec Column, you must use a SmartKey Column
(supplied with the column) in order to access the charging station.
1

5 . Storage and Maintenance

The product must be stored in a cool, dry place. The protective cover
must always be fitted when the product is not in use.
The following periodic maintenance is recommended:
• Wipe down the charging station with a damp cloth.
• Make sure there are no foreign objects in the charging connector.
• Check that the charging station has no physical external damage.
Periodic checks should be carried out on all publicly accessible installations,
in accordance with local legislation.
14
2 3