Herunterladen Inhalt Inhalt Diese Seite drucken

ZAPTEC Pro Bedienungsanleitung Seite 10

Vorschau ausblenden Andere Handbücher für Pro:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 40
English
Start charging with authentication for automatic payment solution/operator
1. The user must be created/activated for the payment solution/operator concerned.
2. Follow the instructions from the applicable payment solution/operator
for authentication and to start charging.
How to Stop Charging
1. To interrupt the charging process: Stop charging as recommended in your car's user
manual.
2. Disconnect the charging connector from the vehicle.
3. Disconnect the charging connector from the charging station.
4. Place the protective cover over the charging point to limit exposure to dust and rain.
Connecting a Charging Pass to your User
Zaptec Pro supports the most commonly used charging passes (Mifare Classic). If you
have a visually readable code, this can be added via Zaptec Portal or by scanning the
charging pass using the charging station as described below. Your user profile must
have access to the installation you wish to use. This must be done by admin/installation
owner in Zaptec Portal.
1. Download the Zaptec app from App Store/Google Play.
2. Register as a user and log in to the Zaptec app.
3. Go to the menu, select user profile and add a new charging card. Then follow the
instructions in the Zaptec app.
How to Monitor the Charging Station (Zaptec Portal)
You can log in via Zaptec Portal to see all your charging stations and all the charging
stations that you are registered to use. If you are the owner of an installation, you can
monitor all use, and you can use this information to share the electricity cost fairly. The
installation or owner of the installation must add you as a user of the installation in order
for you to be able to see the information.
Log in or register as a new user at https://portal.zaptec.com
Adding Users to the Installation
The installation owner can add users of the system by going to 'access'. Here, new users
can be added, invited or removed from the system. This assumes that authentication
(user control) has been activated on the installation.
10

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis