Basic Operation; Cable Length; Moving The Swivel Arm; Inserting Bowl - Bosch myMUM MUM5 7S Serie Gebrauchsanleitung

Turn the bowl clockwise and re-
2.
move.
→ "Removing bowl", Page 37
Clean all parts that come into con-
3.
tact with food before using for the
first time.
→ "Cleaning and servicing",
Page 39
Put the cleaned and dried parts
4.
out ready for use.

Basic operation

7 Basic operation
Basic operation
7.1 Cable length
Adjust the length of the power cable
to your needs.
Adjusting cable length via cable
storage compartment
Pull the power cable out to the re-
1.
quired length.
To shorten the cable, push it into
2.
the cable storage compartment.
7.2 Moving the swivel arm
Press the release button and raise
1.
the swivel arm until it engages.
→ Fig.
5
a The swivel arm is fixed in posi-
tion 2.
Press the release button and move
2.
the swivel arm down until it en-
gages in the vertical position.
→ Fig.
6
a The swivel arm is fixed in posi-
tion 3.
7.3 Inserting bowl
Place the bowl in the base unit.
1.
→ Fig.
7
Use the recesses on the base unit.
Turn the bowl anticlockwise until it
2.
engages.
→ Fig.
8
7.4 Removing bowl
Turn the bowl clockwise and re-
▶
move.
→ Fig.
9
7.5 Inserting tools
Select the tool required.
1.
→ "Overview of tools", Page 35
Press the tool into the main drive
2.
until it engages.
→ Fig.
10
To insert the kneading hook:
3.
Insert the kneading hook with
‒
the protective cap fitted in the
main drive.
Turn the protective cap until the
‒
kneading hook engages fully.
→ Fig.
11
The protective cap
the main drive completely.
7.6 Removing tools
Pull the tool completely out of the
▶
drive.
→ Fig.
12
7.7 Attaching bowl lid
Requirements
¡ The required tool is used here.
¡ The bowl has been inserted.
¡ The swivel arm is closed.
Press the release button, raise the
1.
swivel arm slightly and hold in
place.
→ Fig.
13
Basic operation en
must cover
37