Important Notes; Notes On Operating Instructions; Intended Use - Mettler Toledo InPro 6800 Serie Bedienungsanleitung

6
2

Important notes

2.1

Notes on operating instructions

These operating instructions contain all the information
needed for safe and proper use of the oxygen sensor.
The operating instructions are intended for personnel
entrusted with the operation and maintenance of the
sensors. It is assumed that these persons are familiar
with the equipment in which the sensor is installed.
Warning notices and symbols
This instruction manual identifies safety instructions
and additional information by means of the following
symbols:
a
This symbol draws attention to safety instructions
and warnings of potential danger which, if neglected,
could result in injury to persons and/or damage to
property.
h
This symbol identifies additional information and
instructions which, if neglected, could lead to defects,
inefficient operation and possible loss of production.
2.2

Intended use

METTLER TOLEDO InPro 6800 sensors are intended
solely for inline measurement of the oxygen partial
pressure in liquids and gases, as described in this
instruction manual.
Any use of these sensors which differs from or exceeds
the scope of use described in this instruction manual
will be regarded as inappropriate and incompatible
with the intended purpose.
The manufacturer/supplier accepts no responsibil-
ity whatsoever for any damage resulting from such
improper use. The risk is borne entirely by the user/
operator.
Other prerequisites for appropriate use include:
– compliance with the instructions, notes and require-
ments set out in this instruction manual.
– acceptance of responsibility for regular inspection,
maintenance and functional testing of all associ-
ated components, also including compliance with
local operational and plant safety regulations.
– compliance with all information and warnings
given in the documentation relating to the products
used in conjunction with the sensor (housings,
transmitters, etc.).
– observance of all safety regulations governing the
equipment in which the sensor is installed.
InPro 6800
52 200 953 C
InPro 6800 O
© 02 / 2023 METTLER TOLEDO
Printed in Switzerland
Sensor 12/25 mm
2