Important Notes; Notes On Operating Instructions; Intended Use - Mettler Toledo InPro 5000 Bedienungsanleitung

6
2

Important notes

Notes on operating instructions

2.1
These operating instructions contain all the
information needed for safe and proper use of
the InPro 5000 sensor.
The operating instructions are intended for personnel
entrusted with the operation and maintenance of the
sensors. It is assumed that these persons are familiar
with the equipment in which the sensor is installed.
Warning notices and symbols
This instruction manual identifies safety instructions
and additional information by means of the following
symbols:
This symbol draws attention to safety instructions
and warnings of potential danger which, if neglected,
could result in injury to persons and / or damage
to property.
This symbol identifies additional information and
instructions which, if neglected, could lead to defects,
inefficient operation and possible loss of production.
2.2

Intended use

InPro 5000 sensors are intended solely for in line
measurement of dissolved CO
described in this instruction manual.
Any other use, or use not mentioned here, that is in-
compatible with the technical specifications is deemed
inappropriate. The operator is solely responsible for
any damage arising from such use.
Other prerequisites for appropriate use include:
– observing the instructions, notes and requirements
set out in this instruction manual.
– observing all local safety regulations concerning
safety on work.
– observing all information and warnings in the
documentation dealing with the products used
together with the sensor (housings, transmitters,
etc.).
– observing all safety regulations governing
the equipment in which the sensor is installed.
– observing the prescribed inspection and mainte-
nance intervals.
– correct care and maintenance of the unit,
according to the instruction manual.
– observing the prescribed environmental and
operational conditions, and permitted installation
positions.
InPro 5000
52 002 465
InPro 5000 CO
(carbon dioxide), as
2
© 09 / 06 Mettler-Toledo AG
Printed in Switzerland
Sensor 12 mm
2