Maintenance And Cleaning; Emptying The Filter Housing - Abicor Binzel FEC Originalbetriebsanleitung

9 Maintenance and cleaning

9.3 Emptying the filter housing

EN - 18
After the system has been cleaned, disconnect the
5
device from the compressed air supply again.
Empty the separated welding fume particles from the
6
filter housing in the supplied dust collecting bag.
 9.3 Emptying the filter housing on page EN-17
Dispose of the dust collecting bag in accordance with
7
local regulations.
Remove the cap.
1
Attach the dust collecting bag to the disposal opening.
2
Unlock the latch between the filter housing and the
3
housing.
Tip the filter housing forward and empty the filter
4
housing completely of dust into the dust collecting bag
by tapping on it.
FEC