Identification; Marking; Declaration Of Conformity - Abicor Binzel FEC Originalbetriebsanleitung

FEC

1 Identification

The FEC fume extraction system (Fume Extraction Cyclone) is used for extracting fumes generated during
welding, cutting and grinding processes. The device may be operated only with original ABICOR BINZEL
spare parts. These operating instructions describe only the FEC fume extraction system. The device is
available in 230 V and 115 V versions.
When used in these operating instructions, the terms "device", "product", and "fume extraction system"
always refer to the FEC fume extraction system.

1.1 Marking

This product fulfills the requirements that apply to the market to which it has been introduced.
A corresponding marking has been affixed to the product, if required.

1.2 Declaration of conformity

(EN) EC Declaration of Conformity
Manufacturer Alexander Binzel Schweisstechnik GmbH & Co. KG
Kiesacker
35418 Buseck
Germany
Authorized person for the Address – see address of manufacturer
technical documentation
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Product Description The FEC fume extraction system is used for extracting fumes generated during
welding, cutting and grinding processes.
Designation Fume extraction system
Trade name FEC
The aforementioned object of this Declaration described above, by virtue of its design and construction in the
version we have brought onto the market, complies with the applicable essential health and safety
requirements of the harmonization legislation of the European Union listed below.
This declaration ceases to be valid in case of any modification of the devices without our authorization.
Relevant Union 2006/42/EC Machinery
harmonisation legislation
2014/30/EU EMC
2011/65/EU RoHS
Harmonized standards used EN ISO 12100:2010
EN 55014-1:2017/A11:2020
IEC 6100-3-2:2018
IEC 61000-3-3:2013+A1:2017
IEC 61000-6-2:2016
Harmonized national
standards and technical
specifications
Buseck, 11.09.2022
Signature
Prof. Dr.-Ing. Emil Schubert, Managing Director
Archiving: Document no.: 01-04-2022
1 Identification
Function Device for extracting fumes
generated during welding,
cutting and grinding processes
Type
Source of information
(Filing L96 from 29.03.2014)
(Filing L96 from 29.03.2014)
(Filing L174 from 01.07.2011)
11 September 2022
EN - 3