Cleaning The Filter - Abicor Binzel FEC Originalbetriebsanleitung

FEC

9.2 Cleaning the filter

NOTICE
Risk of material damage due to improper filter cleaning
Improper filter cleaning can damage the filter elements. The result may be insufficient extraction.
► Use only dry and oil-free compressed air (min. 5 – max. 6.5 bar).
► The filter should be cleaned at least once per work shift, depending on how often the system is used.
► Clean the filter immediately when the <Dirty> LED lights up on the control panel.
9 Maintenance and cleaning
Connect the compressed air supply.
1
Open the valve lever on the compressed air
2
connection.
The compressed air creates a dedusting jet and causes
the dedusting nozzle to rotate inside the filter cartridge.
Manually move the cleaning lance up and down
3
multiple times. The filter cartridge is cleaned by
manually moving the cleaning lance up and down.
Close the valve lever on the compressed air
4
connection.
EN - 17