Operation; Decommissioning; Maintenance And Cleaning - Abicor Binzel FEC Originalbetriebsanleitung

FEC

7 Operation

Health risk caused by inhaling harmful dust
The device contains harmful dust that can collect on surfaces and penetrate the ambient air as of the first
use. It can damage the respiratory tract when inhaled.
► Check and wear your personal protective equipment.
► Use the device only in rooms with sufficient ventilation.
► Ensure that all seals on the device are free from dirt and debris.
► The provided filtration system must be used when operating the device.
► The dust collecting drawer must be closed when operating the device.
► Keep the device closed during operation and during the cleaning process.
Fire and explosion hazard due to electric motor overheating
Exceeding the specified operating time can result in fire and an explosion. This may result in serious
injuries.
► Note the maximum operating time of 30 minutes.
► Note the maximum permissible ambient temperature of +40 °C.
► Allow the device to cool down for at least 5 minutes after it was operated for the maximum operating
To switch on the device, press the <I/Power> button.
1

8 Decommissioning

9 Maintenance and cleaning

Scheduled maintenance and cleaning are prerequisites for a long service life and trouble-free operation.
The maintenance cycle is usually three months. If the device is operated for more than 8 hours a day, the
maintenance intervals should be changed as needed.
Health risk caused by inhaling harmful dust
The device contains harmful dust that can collect on surfaces and penetrate the ambient air as of the first
use. It can damage the respiratory tract when inhaled.
► Check and wear your personal protective equipment.
► Use the device only in rooms with forced ventilation.
► Ensure that all seals on the device are free from dirt and debris.
► The provided filtration system must be used when operating the device.
► The dust collecting drawer must be closed when operating the device.
► Do not open the dust collecting drawer until at least one minute has passed since the device was
► Keep the device closed during operation and during the cleaning process.
► Immediately remove dust deposits from the environment with a dust class H industrial vacuum cleaner
WARNING
WARNING
time.
WARNING
switched off.
or a damp cloth.
To switch off the device, press the <0/Error> button.
1
The <Power> LED illuminates.
Disconnect the device from the power supply.
2
7 Operation
EN - 15