Connecting The Separate Exhaust Air Hose (Optional); Establishing The Power Supply - Abicor Binzel FEC Originalbetriebsanleitung

6 Commissioning

6.3 Connecting the separate exhaust air hose (optional)

6.4 Establishing the power supply

► Note the safety instructions.
 2.6 Safety instructions for the electrical power supply on page EN-7
Electric shock due to defective cables
Damaged or improperly installed cables can lead to fatal electric shock.
► Check all live cables and connections for proper installation and damage.
► Damaged, deformed or worn parts should only be replaced by a qualified electrician.
Risk of injury due to fire
Improper use or connection can result in fire. This may result in serious burns.
► Ensure that the operating voltage specified on the nameplate is suitable for the mains voltage.
For the mains voltage and the fuse protection, please refer to:
 4.3 Technical data on page EN-10
 13 Circuit diagram 115 V/50/60 Hz on page EN-27
 14 Circuit diagram 230 V/50 Hz on page EN-29
EN - 14
WARNING
WARNING
Remove the cap from the connector for the separate
1
exhaust air hose.
Insert the separate exhaust air hose into the connector.
2
FEC