Cleaning; Maintenance; Visual Inspection; Replacing Blades - Stihl iMOW 5.0 Gebrauchsanleitung

19 Cleaning

19 Cleaning
19.1 Cleaning the Robot Mower
WARNING
■ The cutting edges of the blades are sharp.
There is a risk of cutting oneself.
► Wear work gloves made of robust material.
► Stop the robot mower and activate the device
lock.
► Clean the hood and control panel with a damp
cloth.
► Clean the charging contacts with a damp
cloth.
1
► Grab the robot mower at the front grip sur‐
face (1) and the rear grip surface (2).
► Place the robot mower on its side and secure
it against falling over.
3
► Check the plug of the diagnostic socket (3) for
damage and tight fit.
► Clean the mowing unit (4) with a gentle water
jet.
► Remove built-up dirt with a wooden rod or a
soft brush and rinse with a gentle water jet.
19.2 Cleaning the docking station,
power supply, charging cable
and plug connections
► Disconnect the power supply's mains plug
from the wall outlet.
► Clean the docking station, power supply and
charging cable with a damp cloth.
► If necessary, remove built-up dirt with a soft
brush.
0458-011-9801-A
2
4
► Clean plug connections with a dry lint-free
cloth.
► If necessary, remove built-up dirt with a
brush.

20 Maintenance

20.1

Visual Inspection

Regularly check the robot mower:
– Cleanliness of the charging contacts
– Check the hood and protective strip for dam‐
age
– Check that the wheels run smoothly
– Check the blades for damage, wear and free‐
dom of movement.
– Check the mowing unit for damage and
wear.
– When the wear marks (1) on the mowing
disk are visible, replace the mowing disk.
– Check the plug (2) of the diagnostic socket
for damage and tight fit.
20.2

Replacing blades

WARNING
■ The cutting edges of the blades are sharp.
There is a risk of cutting oneself.
► Wear work gloves made of robust material.
► Stop the robot mower and activate the device
lock.
English
1
2
83