Remote Control Button List - Packard Bell Easy Hdd Recorder Handbuch

UK
R C B
EMOTE ONTROL UTTON
1. Standby, switch on/off the Easy HDD Recorder.
2. Mute, turn on/off audio output.
3. HDD, show/hide HDD title list.
4. Digital (DV) Source, press to view video contents from a digital
video camera and to swap between digital sources (DV or
USB).
5. DVD, press to view or play optical disc content. While in DVD
playback, pressing DVD will bring up the DVD menu.
6. Analogue Source, select external analogue signal source.
7. Fast reverse, there are three modes: 4X, 8X, 32X.
8. Fast forward, there are three modes: 4X, 8X, 32X.
9. CH+/CH-, change TV channel.
10. Pause
11. Stop/Return, press once to stop playback/recording, press
again to return to root menu (only for VCD discs).
12. V+/V-, adjust the audio output volume.
13. Play/OK, confirm selection or Play.
14. Next title or chapter.
15. Previous title or chapter.
16. Display, press once to show playback information, press again
for help.
17. Record/OTR, record a TV programme or an AV signal from an
external source.
• When recording in OTR mode, each press of this button will
add 30 minutes to the recording time to a maximum of 3
hours. Time Shifting Mode must be activated for this to work.
18. Timer, set or change a schedule for recordings.
19. P/I, Progressive Scan/Interlaced
20. Menu, access system setup menu or disc menu.
21. 0---9, number buttons.
22. Zoom
23. Repeat/Shuffle
24. Angle
25. Audio Language
26. Subtitles
L
IST
Getting Started - Controls -
8