Dubbing (Copy From Hdd To Dvd) - Packard Bell Easy Hdd Recorder Handbuch

A small icon under the preview window indicates that the
title is now locked (no viewing/editing/erasing). Before
playing a locked title, you will be prompt to enter the pass-
word. The default password is 0000. Go to the setup menu
to change the password.
To unlock a locked title, repeat steps 1 to 5.
Protect A Title (Prevent From Editing)
1. Press the HDD button until the HDD title list appears.
2. Use the and buttons to highlight the desired title.
3. Press to display the editing menu.
4. Use the and buttons to highlight Protect.
5. Press Play/OK to select Protect.
A small icon under the preview window indicates that the title is
now protected (no editing/erasing).
To edit or delete a protected title, unprotect it by repeating step 1 to
5.
D (C HDD
UBBING OPY FROM
1. Before selecting titles for dubbing, insert a recordable disc into
the disc tray.
• If this is the first time the disc has been used the Easy HDD
Recorder may take a few seconds to format the disc, determine
compatibility and free recordable space. During this time you
will see the Loading logo.
• The percentage of available disc space is displayed in the lower
right corner of the HDD title list screen.
2. Press the HDD button until the HDD title list appears.
Editing and Dubbing
23 -
DVD)
TO
3. Use the and buttons to highlight the title or titles you
wish to copy to the DVD and press Record/OTR to select the
highlighted title for dubbing. Once a title is selected for dubbing,
an icon will appear next to the title name.
You can press the Record/OTR button again to remove the
selection. As you select or deselect titles, the disc capacity
information will be updated. If the title you selected is larger
than the space available on the disc, the recorder will display
a warning message.
If the recording is too big to place on the DVD it can be split
into smaller parts (see Split function earlier in this guide).
If the disc is replaced or removed prior to dubbing, all dub-
bing selections will be cleared.
Locked titles cannot be dubbed to DVD.
4. Press the HDD button to start dubbing. Dubbing will copy the
title(s) selected to the recordable DVD, including properties such
as title name, duration, index picture or chapter marks. Once
dubbing starts the recorder returns to Time Shifting mode. It is
possible to press the HDD button and play any title on the HDD
while dubbing is in progress., however editing is not possible
until the dubbing has finished.
If the writing to DVD fails at any point during this operation,
a warning message will appear and the HDD title list will be
reset.