Timer Recording - Packard Bell Easy Hdd Recorder Handbuch

In Time Shifting mode, the Easy HDD Recorder will split the
recording into several 3-hours titles if the recording is longer
than 3 hours.
In Time Shifting mode, during the recording you can press
the Record/OTR button repeatedly to increase the length of
the title you are saving by 30 minutes up to a maximum of
3 hours.
Time Shifting cannot be used with a DV (Digital Video)
source. If you want to record your DV material onto the
HDD, press the Digital Source button, the recorder will
switch to DV mode and the remote control can control the
DV camera. You can issue FF, FR, Pause, Play commands for the cam-
era using the Easy HDD Recorder remote control.
You cannot change the channel or the source if a recording
is active (if the end of the recording segment has not been
entered, or in the case of long recording, it has not been
reached). If you attempt to change the channel or source,
the Easy HDD Recorder will prompt you to stop recording. The seg-
ment will be saved on HDD and then the channel or source will be
changed.
T R
IMER ECORDING
1. Make sure the clock is set accurately to your local time. See the
Setting the Clock
section later in this guide.
2. Press the Timer button to display the record scheduler.
To delete a programmed event, use the
to highlight it and press the Record/OTR button.
3. Use the and buttons to highlight an event and press
Play/OK. The Item Editor dialogue box appears.
Time Shifting
19 -
4. The following are descriptions of the items in the dialogue box:
Source: Select your input source.
Record To: Select the location for the recording.
Quality: Select the record quality.
Mode: Select the record mode (once, daily or weekly).
Start: Select the start time of time recording event.
End: Select the end time of time recording event.
Title: Enter a title for the recording.
5. Move cursor to the
settings.
6. Several minutes before the time recording event begins, a dia-
logue box will appear on your TV screen prompting you to con-
firm or cancel the event. If you do not make any selection, the
timer recording will proceed as scheduled.
If the recorder is in standby status, it will automatically
power on two minutes before the start of the time recording
event.
A recordable DVD disc can record 360 minutes of programs
(SLP quality). These programs can be divided into 48 titles.
buttons
and
OK
button and press Play/OK to save your