Set Recording Quality; Record To Dvd; Record To Hdd - Packard Bell EASY HDD RECORDER Handbuch

UK
R
ECORDING
S R Q
ET ECORDING UALITY
Six different record qualities can be set for recording. Higher quality
will consume more space on HDD or DVD disc, reducing the overall
time that can be recorded.
Record Quality Recording
Time (4.7GB,
DVD)
HQ (High Quality) 1 hour
SP (Standard Play) 2 hour
SP+ (Standard Play
3 hour
+)
EP (Extended Play) 4 hour
LP (Long Play) 5 hour
SLP (Super Long
6 hour
Play)
To set the recording quality please carry out the following:
1. Press the MENU button on the remote control to access the
SETUP MENU
2. Use the Navigation buttons to highlight the
press the Play/OK button.
3. Use the and buttons to highlight the
item and press the Play/OK button.
4. Use the and buttons to highlight the quality setting you
want and press the Play/OK button to confirm.
Choose the record quality carefully to ensure that there will
be enough space available for your recording on the HDD or
DVD.
R T DVD
ECORD O
1. Insert a recordable DVD into the unit and switch to DVD mode
by pressing the DVD button.
2. Press the Analogue Source or Digital Source button to the select
signal source for recording.
3. Press the Record/OTR button to start recording, a status bar is
displayed at the bottom of the screen to show the current record-
ing status.
4. Press Stop to stop the recording.
5. Press the DVD button to switch to DVD mode to find the seg-
ment just recorded.
It may take a few seconds to completely stop the recording
process, please wait until Stop is displayed on the status bar
to switch to DVD mode.
Recording Recording
Time (80GB, Time (160GB,
HDD) HDD)
17 hours 35 hours
34 hours 68 hours
51 hours 102 hours
68 hours 136 hours
85 hours 170 hours
96 hours 192 hours
Recording
icon, and
Record Quality
ton is pressed, an additional 30 minutes will be added to the record
time. To pause the recording, press the Pause button on the remote
control, press the Play/OK button again to resume recording.
R
ECORD TO
1. Press the Analogue Source button until the desired source is
selected.
• The following video sources are available:
>
>
>
>
2. If you are in Time Shifting mode, press Record.
3. If you are in Recording mode, make sure
screen status bar) is selected.
4. If not, press the HDD button to select the HDD and press Record.
5. Press Stop to stop recording.
Recording
Time (250GB,
HDD)
53 hours
106 hours
159 hours
212 hours
265 hours
300 hours
When recording from a DVD in this manner, the recorder
will stop any recording to the HDD. Once the DVD record-
ing is finished, press the HDD button to restart the Time
Shifting mechanism.
The recorder will continue to record until the disc is full or
when the Stop button is pressed. To set the recorder to
record for 30 minutes only, press the Record/OTR button
after recording has started. Each time the Record/OTR but-
HDD
SCART
Front CVBS
Front S-Video
Tuner
If TV tuner is selected, use the
the desired channel.
Recording
Time (400GB,
HDD)
85 hours
170 hours
255 hours
340 hours
425 hours
480 hours
and buttons to select
Hard Disc
(see on-
Time Shifting -
18