Spare Parts/Accessories; Trouble Shooting; Fault Correction - Parkside PHS 650 A1 Originalbetriebsanleitung

Spare Parts/Accessories

Spare parts and accessories can be obtained at www.grizzlytools.shop
If you have issues ordering, please use the contact form. If you have any other questions,
contact the service centre (see page 28).
Position instruction
manual
2
3
11

Trouble Shooting

Problem
Device does not start
Device runs with inter-
ruptions
Blades become hot
Position exploded
drawing
38-42
30
43
Possible cause
Mains voltage not on
On/Off switch (7) or dead-
man switch (4) defective
Worn carbon brushes
Defective motor
Power cable is damaged
Internal loose electrical
connection
On/Off switch (7) or dead-
man switch (4) defective
Blades (2) are blunt
Blades (2) are notched
Too much friction due to
lack of lubrication
Description
Cutter bar
Hand protection
Blade protection

Fault correction

Check plug socket, cable, line and
plug, where appropriate, have re-
paired through electrical specialist
Repair by Service Centre
Check the cable and have it
changed by the Service Centre if
necessary
Repair by Service Centre
Have the blades sharpened or
replaced (Service Centre)
Have the blades checked or re-
placed (Service Centre)
Oil the blades (2)
GB
Order No.
91110101
91110100
91110102
29