Operation; Switching On And Off; Turning The Handle; Working With The Electric Hedge Trimmer - Parkside PHS 650 A1 Originalbetriebsanleitung

GB
ground and not on a ladder or other
unstable surface.
• Carefully inspect the surface to be cut and
remove all wires and other foreign bodies.
• Hold the hedge trimmer with both hands,
one hand on the handle (
other hand on the bow-type handle (
• Before using the hedge trimmer, ensure that
6) of the handle (
the release (
engaged.

Operation

Do not use the equipment
without the hand guard.
Wear suitable clothing and work
gloves when working with the
equipment. Wear eye and ear pro-
tection. Ensure that the equipment
is functional before each use.
There is a risk of personal injury
and property damage!
The On/Off switch and the safety
switch must not be held closed.
They must switch off the motor
when on is released. Should a
switch be damaged, stop working
with the equipment. Ensure that the
mains voltage value matches the
label on the equipment. There is a
risk of electric shock!
Note noise protection and local
specifications.

Switching On and Off

Remove the blade protection (
before switching the unit on.
Ensure that you are standing in a firm
position with both hands gripping the
hedge trimmer away from the body.
Ensure that the trimmer is in contact
with no other objects before switch-
24
8) and the
1. For tension relief of the cable, form a
4).
8) is
2. Connect the device to the mains voltage.
3. Hold the safety switch on the loop han-
4. Release one of the two switches to
The handle (8) has 5 positions:
1. Pull the release (6) backwards and rotate
2. Let go of the release (6) so that the han-
Working with the Electric
Hedge Trimmer
11)
• Hold the device with both hands, one
• Switch off the equipment immediately
ing on.
In this way you avoid damage to
the appliance and possible injury
to people.
loop of the end of the extension cable
and bring this through the opening at
the handle and suspend in the tension
relief at the grip (10).
dle (4) and push the On/Off switch on
the grip (7) at the same time to switch
the unit on. The hedge trimmer will be
run at maximum speed.
switch the trimmer off.

Turning the handle

the handle (8) into the desired position.
dle (8) locks into place.
During cutting work, ensure that no
contact is made with objects, e.g.
such as wire fencing or main plant
stems. This may result in damage to
the cutter bar.
hand on the handle (
hand on the bow-type handle (
in the event that the blades are blocked
by solid objects, pull out the power plug
then remove the object.
8) and the other
4).