Advice For Disposal / Options Of Re-Use; Disposal Of New Device Packaging; Disposal Of Electrical And Electronic Components - Optimum OPTigrind GB 100S Betriebsanleitung

6.3

Advice for disposal / Options of re-use

Please dispose of your equipment in an environmentally friendly manner, by not placing waste
in the environment but in a professional manner.
Please do not simply throw away the packaging and later the disused machine, but dispose of
both in accordance with the guidelines laid down by your city council/local authority or by an
authorised disposal company.
6.3.1 Decommissioning
CAUTION!
Immediately decommission used machines in order to avoid later misuse and
endangering of the environment or of persons.

Cut the connection cable.

Disassemble the machine if required into easy-to-handle and reusable assemblies
and component parts.

Dispose of machine components and operating fluids using the intended disposal
methods.

6.3.2 Disposal of new device packaging

All used packaging materials and packaging aids from the machine are recyclable and gener-
ally need to be supplied to the material reuse.
Any packaging components made of cardboard box can be chopped up and supplied to the
waste paper collection. The films are made of polyethylene (PE) and the cushion parts are
made of polystyrene (PS). These materials can be reused after reconditioning if they are
passed to a collection station or to the appropriate waste management enterprise.
Only forward the packaging materials correctly sorted to allow direct reuse.
INFORMATION
Please take care in your interest and in the interest of the environment that all component parts
of the machine are only disposed of in the intended and admitted way.
Please note that the electrical devices comprise a variety of reusable materials as well as envi-
ronmentally hazardous components. Please ensure that these components are disposed of
separately and professionally. In case of doubt, please contact your municipal waste manage-
ment. If appropriate, call on the help of a specialist waste disposal company for the treatment of
the material.
6.3.3

Disposal of electrical and electronic components

Please make sure that the electrical components are disposed of professionally and according
to the statutory provisions.
The device is composed of electrical and electronic components and must not be disposed of
as household waste. According to the European Directive 2011/65/EU regarding electrical and
electronic used devices and the implementation of national legislation, used power tools and
electrical machines need to be collected separately and supplied to an environmentally friendly
recycling centre.
As the machine operator, you should obtain information regarding the authorised collection or
disposal system which applies for your company.
Appendix
Version 1.0.2 - 2021-9-30 Translation of original instruction
GB100S EN
35