Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
be duly qualified,
and strictly follow these operating instructions.
In the event of improper use
there may be a risk to personnel,
the grinding machine and other property and
the functionality of the belt grinder may be compromised.
1.6
User positions
The operator position is in front of the belt grinder or next to the belt grinder.
1.7
Safety measures during operation
1.8
Safety devices
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other persons working with the belt grinder. The possible consequences
are:
injuries due to components or workpieces flying off at high speed,
contact with rotating parts,
fatal electrocution.
The belt grinder must only be operated with fully functional safety devices.
Stop the belt grinder immediately if there is a failure on the safety device or becomes ineffec-
tive.
It is your responsibility!
If a safety device has been activated or has failed, the belt grinder must only be used if
the cause of the fault has been eliminated,
The belt grinder features the following safety devices:
A protective hood over the motor.
A support surface for the workpiece.
An open top partial cover to allow grinding of longer surfaces on the top.
A restart protection that prevents the unit from restarting independently by connecting the
power supply.
CAUTION!
Always work carefully and observe the limit values of the process.
Safety
Version 1.0.2 - 2021-9-30
Translation of original instruction
GB100S
EN
25
Werbung
Inhaltsverzeichnis
