Final Assembly Of The Narrow Backrest - Sirona Dental C1+ Installationsanleitung

Sirona Dental Systems GmbH

15 Final Assembly of the Narrow Backrest

2.
6.
3.
1. Attach and snap on backrest cover.
The fixing straps A must snap on the studs (with Torx
screws) outside the backrest support.
2. Remove the transport safety devices from the backrest
padding.
See paper slip concerning the padding for details.
3. Pull off the protective foils from the Velcro strap of the
backrest padding.
4. Hook the padding onto the two upper studs.
5. Pull down the padding backing in the lower hooking
area (do not let the padding come in contact with edges
B!) and hook it onto the lower studs.
6. Affix the adhesive strips of the Velcro strap by pressing
them onto the backrest padding.
7. With the electrical headrest:
Press the Velcro strap in area Cuniformly onto catch D.
59 06 602 D 3382
D 3382.031.01.02.02
4.
C
3.
B
5.
15 Final Assembly of the Narrow Backrest
7.
D
A
A
B
A
A
1.
21