Sirona Dental C1+ Installationsanleitung Seite 60

14 Final Work
9.
10. Fit the instrument hoses on the dentist element
(according to order) from the left to the right:
ATTENTION
Observe the anti-twist lock on the hose couplings!
– Plug on and tighten the hose for SPRAYVIT.
– Plug on and tighten the handpiece hoses for
turbine and motor.
– Plug on and tighten the hose for SIROSON L.
– Plug on and tighten the connecting cable for
SIROTOMor plug on the cable for the POLYLUX
light.
– Plug on the hose for SIROCAM C.
– Adapt the corresponding handpieces.
11. Fit the instrument hoses on the assistant element
(according to order) from the left to the right:
– Plug on the light guide for the POLYLUX light
(audible cracking noise, observe the information
below!) or plug on the hose for surgical aspiration
.
– Plug on and tighten the hose for SPRAYVIT.
20
10.
11.
– Plug on suction hose with upper part of filter A .
– Plug saliva ejector hose with upper part of filter A
on the connecting piece.
– Adapt the corresponding handpieces.
ATTENTION
Observe the anti-twist lock on the hose couplings!
12. Attach the connecting hose to the water unit and
assistant element.
i
NOTE
The retaining force for the POLYLUX light guide can be set
with the adjusting screws C.
Sirona Dental Systems GmbH
10.
A
C
i
C
59 06 602 D 3382
D 3382.031.01.02.02