Herunterladen Inhalt Inhalt Diese Seite drucken

Sirona Dental C1+ Installationsanleitung Seite 52

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

7 Fastening the Chair Base to the Floor
5.
Screw down the chair at points A, B,C, F , and G.
– With a concrete floor:
Use 10 x 160 wood screws and washers.
– With a wooden floor:
Use 10 x 80 wood screws and washers.
For left-handed version drill hole H instead of C
must be used.
i
NOTE
The chair is screwed down at points D and Eafter the dentist
element has been installed. Then it can be moved upward
(via motor drive).
ATTENTION
The chair base must be exactly adjusted to the horizontal
position.
For compensating any unevenness in the floor, the
shimming plates contained in the package can be used.
More shimming plates can be ordered by quoting the
following order numbers:
12
7.
C
A
B
5.
H
F
D
E
14 36 612 D 3264
– 1 mm: Order No. 47 09 304
– 2 mm: Order No. 47 09 312
6.
Raise backrest with the one hand and remove the
transport safety device on the pendulum switch with the
other one.
ATTENTION
Do not lift by headrest.
7.
Check the pendulum for smooth and easy running.
Sirona Dental Systems GmbH
6.
G
Order No.:
59 06 602 D 3382
D 3382.031.01.02.02

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis