Lcd-Anzeiger - ABB TTF300 Inbetriebnahmeanleitung

TTF300 TEMPERATUR-MESSUMFORMER FELDMONTAGE | CI/TTF300-DE REV. H
CSA Explosion proof und Intrinsically Safe
Modell TTF300-R7H (R1H + R3H)
Bis HW-Rev 01.07:
Control Drawing
Ab HW-Rev 02.00:
Control Drawing
Modell TTF300-R7P (R1P + R3P)
Control Drawing
Modell TTF300-R7F (R1F + R3F)
Control Drawing
XP, DIP Class I, II, III, Div. 1 + 2, Groups A-G, factory sealed
Class I, Div. 1 + 2, Groups A, B, C, D
Class I, Zone 0, Ex ia IIC
SAP_214825
Siehe beiliegende Information
TTF300-R1..P (IS)
TTF300-R1..F (IS)

LCD-Anzeiger

FM Intrinsically Safe
Control Drawing
I.S. Class I Div 1 und Div 2, Group: A, B, C, D oder
I.S. Class I Zone 0 AEx ia IIC T*
U / V = 9 V, I / I < 65,2 mA, P
i max i max
FM Non-Incendive
Control Drawing
N.I. Class I Div 2, Group: A, B, C, D oder Ex nL IIC T**, Class I Zone 2
U / V = 9 V, I / I < 65,2 mA, P
i max i max
CSA Intrinsically Safe
Control Drawing
I.S. Class I Div 1 und Div 2; Group: A, B, C, D oder
I.S Zone 0 Ex ia IIC T*
U / V = 9 V, I / I < 65,2 mA, P
i max i max
CSA Non-Incendive
Control Drawing
N.I. Class I Div 2, Group: A, B, C, D oder Ex nL IIC T**, Class I Zone 2
U / V = 9 V, I / I < 65,2 mA, P
i max i max
* Temp. Ident: T6 T 56 °C, T4 T
amb
** Temp. Ident: T6 T 60 °C, T4 T
amb
SAP_214 748
= 101 mW, C = 0,4 μF, L = 0
i i i
SAP_214 751
= 101 mW, C = 0,4 μF, L = 0
i i i
SAP_214 749
= 101 mW, C < 0,4 μF, L = 0
i i i
SAP_214 750
= 101 mW, C < 0,4 μF, L = 0
i i i
85 °C
amb
85 °C
amb
19