Mounting Workpiece Holder; Mounting Of Rests; Follow And Steady Rests - Optimum OPTiturn TH 3309 Betriebsanleitung

4.13.7 Mounting workpiece holder

Centering point

Clean the taper bore of the lathe spindle holding
fixture.

Clean the morse taper and the taper of the cen-
tring point.

Press the centring point and the reduction sleeve
into the taper bore of the lathe spindle holding fix-
ture.
4.14

Mounting of rests

4.14.1 Follow and steady rests

Use follow or steady rests to support long turned parts if the shear forces of the turning tool
would bend the turning parts.
Img.4-10: Follow rest Steady rest
Version 1.1.0 - 2020-08-06
Img.4-9:
Translation of original instruction
Centering point
TH3309 | TH3309D EN
113