Wohler DC 100PRO Bedienungsanleitung Seite 63

4. Menu Q vent. Wöhler DC 100
PRO
Press the "Enter" button to access the menu for entering further parameters.
The display shows successively the burner performance (in kW), the diameter
of the exhaust-gas line (in m), the room temperature (in °C) and the outside
temperature (in °C). These values can either be changed with "+/-" button or
confirmed with the "Enter" button. If you have entered an incorrect value or
parameter, you can return to the display of the stopped measured values by
pressing the "C I/O" button. You can then restart the parameter query without
deleting the measured values.
After entering the last parameter the device indicates the calculated venti-
lation loss qLSNorm in %. Press the "Enter" button to go to the menu opti-
on "Print". Repress the "Enter" button to start the print-out on the thermal
printer.
The result can also be printed out later on using the menu options "Log./IR"
and "Print". The log will only be deleted after starting a new test.
63
e-Mail: mgkg@woehler.com http://www.woehler.com