52
Installation of control cabinet
The wall mounting of the control cabinet is carried out using the enclosed fasteners.
Under no circumstances may new holes be drilled in the rear wall of the control cabinet!
Before mounting, check the wall condition.
Only use fasteners suitable for the wall condition (screws with max. Ø 6 mm).
Mount the fastening lugs on the control
cabinet from behind with the enclosed
screws as shown.
CONTI Sanitärarmaturen GmbH | Hauptstraße 98 | 35435 Wettenberg | Deutschland | Tel. +49 641 98221 0 | Fax +49 641 98221 50 | info@conti.plus
www.conti.plus | Druckfehler und Irrtümer sowie technische und maßliche Änderungen vorbehalten. | Errors and technical changes remain reserved.
max. ø 6 mm
320
280
Alignment of the fixing lugs only
possible horizontally or vertically.
max. ø 6 mm