Adding Remote Controls - SOMFY ROLLIXO io Bedienungsanleitung

Rollixo io
Operation in automatic closure mode
Automatic closure of the door occurs after a time delay programmed during installation.
A new command during this time delay cancels automatic closing and the door remains open.
The following command results in the closure of the door.

Adding remote controls

This operation must be carried out close to the receiver.
This operation is used to copy the function of a button on a memorised Keygo io remote control (remote
control "A") to a button on a new Keygo io remote control (remote control "B").
[1] [2]
Remote control memorised
[1]. Press the outer left and right buttons on the previously memorised remote control simultaneously until
[2]. Press the button to be copied on the remote control already memorised until the indicator light on top
of the button on the receiver comes on permanently.
Prog
[3].
[4].
The indicator light above the
receiver.
Copyright © 2012 Somfy SAS. All rights reserved
[3]
Prog
Remote control to be memorised
Prog
[4]
Prog
5