Intended Use; Package Contents - Parkside PPKS 35 B3 Bedienungs- Und Sicherheitshinweise

above is prohibited and potentially dangerous�
Damage or injury caused by misuse or disregar-
ding the above warning is beyond the liability of
the manufacturer�
KEEP OUT OF THE REACH OF CHILDREN!
z Intended use
The PPKS 35 B3 circle cutter is designed for use
with the PPS 40 and PPSK 40 plasma cutters from
Parkside� You can use the circle cutter to make
circular cuts, the diameter of these cuts can be
continuously adjusted over a range of approx� 15
cm to 60 cm� Centring can be carried out either
using a magnet or metal pin (during preparation for
each centre punch)� Please refer to the operating
instructions of the plasma cutter you are using for in-
formation about material thicknesses which can be
cut� The device is not intended for commercial use�
z Package contents
1 Circle cutter PPKS 35 B3
1 Magnetic holder
1 Metal pin
1 Fixing screw
1 Set of operating instructions
1 Bakelite ring
1 Allen key
18
GB