Introduction; Intended Use; Features; Package Contents - Parkside PDFS 1300 A1 Gebrauchsanweisung, Originalbetriebsanleitung

DIAMOND STONE CUTTER
PDFS 1300 A1

Introduction

Congratulations on the purchase of your new appli-
ance . You have chosen a high-quality product . The
operating instructions are part of this product . They
contain important information about safety, usage
and disposal . Before using the product, please
familiarise yourself with all operating and safety
instructions . Use the product only as described and
for the range of applications specified . Please also
pass these operating instructions on to any future
owner .

Intended use

The appliance is designed to make cuts or slits in
mineral materials on a stable support (with or with-
out the use of water) . The appliance is not suitable
for cutting wood, plastic, metal or reinforced con-
crete .
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents . Not for commercial use .

Features

ON/OFF switch
Locking screw
Dust outlet
Rip fence slot
Wing screw for cutting angle preselector
Cutting angle scale
Wing screw for rip fence slot
Screws
Rip fence
Vacuum adapter for dust extraction
Cutting disc
Clamping flange
Clamping screw/washer
Hex key
Water inlet
Accessory screw
Valve
Water inlet hose
Water connection adapter
RESET button
Indicator
Test button
Residual current circuit breaker
■ 2 │ GB │ IE │ NI
Spindle lock
Protective cover
Base plate

Package contents

1 diamond stone cutter
1 rip fence
1 vacuum adapter for dust extraction
1 hex key
1 cutting disc (pre-assembled)
1 water inlet hose
1 water connection adapter
1 water inlet
1 residual current circuit breaker
1 set of operating instructions

Technical data

Nominal power input: 1300 W
Nominal voltage:
Thread size:
Rated speed:
Cutting discs:
125mm
125mm
Max . cutting depth:
max.40 mm
max.40 mm
Protection class:
Noise and vibration data:
Noise measurement value determined in accord-
ance with EN 60745 . The A-rated noise level of
the power tool is typically:
230 V ∼ 50 Hz
(AC)
M6
n 12000 rpm
1x Ø 125 mm x 2 mm x
Ø 22 .23 mm, 9 teeth
At 0°:
40 mm
At 45°:
26 .5 mm
II / (double insulation)
PDFS 1300 A1