Introduction; Intended Use - Parkside PFSM 500 A1 Originalbetriebsanleitung

Content
Introduction ............................... 31
Intended use .............................. 31
General description .................... 32
Scope of delivery ........................... 32
Function description........................ 32
Summary ...................................... 32
Technical specifications ............... 32
Safety Instructions...................... 33
Symbols and icons ......................... 33
General safety instructions .............. 33
Further Safety Instructions ................ 35
Residual risks ................................. 36
Assembly ................................... 36
Mounting the cutting disc ................ 36
Attaching the protective cover .......... 37
Mounting the parallel stop ............... 37
Setting up ..................................... 37
Checking the closure ...................... 38
Operation .................................. 38
Switching on and off ...................... 38
Performing a parallel cut ................. 38
Performing an angle cut .................. 39
Performing a mitre cut (jolly cut) ....... 39
Cleaning and maintenance ......... 39
Cleaning ....................................... 40
Storage ...................................... 40
Waste disposal and environ-
mental protection ....................... 40
Replacement parts/accessories ... 40
Guarantee ................................. 41
Repair Service ............................ 42
Service-Center ............................ 42
Importer .................................... 42
Translation of the original
EC declaration of conformity ...... 47
Exploded Drawing ..................... 49

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
a final inspection. The functionality of your
equipment is therefore guaranteed.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal. Before using the prod-
uct, familiarise yourself with all of
the operating and safety instructions.
Use the product only as described
and for the applications specified.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.

Intended use

The tile cutting machine is designed for
small and medium-sized tiles (glazed,
ceramic or similar). Wood and metal must
not be cut with it. This machine is intended
to be used together with water.
The equipment is designed for use by
adults. Young people under the age of 16
are permitted to use the equipment only
under supervision. The manufacturer shall
not be liable for damages caused by use
other than for the intended purpose or by
incorrect operation.
GB
31