Symbols On The Device; Initial Startup - Kärcher IVM 40/12-1 M Z22 Bedienungsanleitung

Symbols on the device

The device is suitable for vacuuming dusts
up to dust class M.
WARNING
Damage to the skin, lungs and eyes
Expulsion of fine dust during emptying and
maintenance work and disposal
Wear the prescribed personal protective
gear when performing during emptying and
maintenance work, including disposal of
the dust bag.
The maximum vacuum value in relation to
the hose cross-section is specified on the
label. The actual value can be read on the
pressure gauge. For the values applicable
to this device, see chapter Reading the
minimum volumetric flow. If this value is not
reached, the filter must be cleaned (see
chapter Dedusting the filter) or replaced
(see chapter Replacing the filter). The var-
ious different hose cross-sections allow ad-
aptation to the various different connection
cross-sections of the accessories.
Do not vacuum any sources of ig-
nition! Suitable for vacuuming in-
flammable dusts of dust explosion
classes in zone 22.
Filter
(Order no. 9.990-222.0)
Dust bag
(Order no. 9.989-606.0)
18

Initial startup

WARNING
Potential equalisation line not connect-
ed correctly
Electric shock
Every time before use, check whether the
equipotential bonding conductor (earthing
conductors) are connected.
WARNING
Danger from dust that is harmful to your
health
Respiratory sicknesses through inhalation
of dust.
Do not vacuum without correctly installed
filter elements, otherwise a danger to
health from increased fine dust emission is
present.
ATTENTION
Missing filter element
Damage to the suction motor
Do not vacuum without a filter element.
1. Bring the device into the working posi-
tion.
2. Secure the device with the parking
brakes.
3. Ensure that the suction head is fitted
correctly.
4. Insert the suction hose (not included in
the scope of delivery) into the suction
connection.
5. Check the filling level in the dirt recepta-
cle (see chapter Check the dirt recepta-
cle filling level).
6. Empty the dirt receptacle if necessary
(see chapter Emptying the dirt recepta-
cle).
7. Fit the dust bag before dry vacuuming
(see chapter Dry vacuuming).
8. Fit the desired accessory (not included
in the scope of delivery) onto the suction
hose.
Check the dirt receptacle filling level
The dirt receptacle must be emptied when
filled to the lower edge of the suction hose
port on the dirt receptacle. The device does
not switch off automatically if the maximum
filling level is exceeded.
English