Accessories And Spare Parts; Scope Of Delivery; Device Description; Symbols On The Device - Kärcher IVM 40/12-1 H Z22 Bedienungsanleitung

Accessories and spare parts

DANGER
Risk of explosion when used with non-
permitted accessories
Only use accessories permitted by the
manufacturer and with the Ex label for type
22 usage.
Only use original accessories and original
spare parts. They ensure that the appliance
will run safely and fault-free.
Information on accessories and spare parts
can be found at www.kaercher.com.
Note
No accessories are included in the scope of
delivery. The accessories must be ordered
separately depending on the application.

Scope of delivery

Check the contents for completeness when
unpacking. In the event of shipping dam-
age, please notify your dealer.

Device description

For the illustrations, refer to the graphics
page
Illustration A
Steering roller with parking brake
1
Dirt receptacle
2
Sealing plug on the dirt receptacle
3
Sealing plug on the filter ring
4
Spacer lock
5
Filter dedusting
6
Pressure gauge
7
Suction turbine power switch
8
H filter present indicator light
9
Suction head
10
filter
11
Sealing ring
12
Filter hold-down device
13
Mains cable
14
Type plate
15
Carrying handle
16
Carrying handle
17
Bow handle of the dirt receptacle
18
Push handle
19
Filter ring
20
22
Suction hose port on the filter ring
21
Suction hose port on the dirt receptacle
22
Chassis
23

Symbols on the device

The device is suitable for vacuuming dusts
up to dust class H.
WARNING: This device contains dusts that
are harmful to your health. Emptying and
maintenance, including removal of the dust
bag, may only be performed by appropri-
ately trained personnel wearing suitable
personal protective equipment. Do not
switch on until the entire filter system has
been installed and the volume flow control
functionality has been checked.
The maximum vacuum value in relation to
the hose cross-section is specified on the
label. The actual value can be read on the
pressure gauge. For the values applicable
to this device, see chapter Reading the
minimum volumetric flow. If this value is not
reached, the filter must be cleaned (see
chapter Dedusting the main filter) or re-
placed (see chapter Replacing the main fil-
ter). The various different hose cross-
sections allow adaptation to the various dif-
ferent connection cross-sections of the ac-
cessories.
Do not vacuum any sources of ig-
nition! Suitable for vacuuming in-
flammable dusts of dust explosion
classes in zone 22.
English