General Safety Directions For Power Tools - Parkside PTBM 400 A1 Originalbetriebsanleitung

Wear ear protection
Wear eye protection
Do not wear long hair uncovered.
Use a hair net.
Do not wear gloves.
Caution! Risk of injury from rotating
parts!
Electrical machines do not belong
with domestic waste
Caution! - Laser beam
Do not look into the beam!
Laser class 2
Ø (mm):
< 3
3 - 4 5 - 6
5 7 - 8
6 - 8 9 - 10
> 10
> 8
Speed table
Symbols used in the instructions:
Hazard symbols with in-
formation on prevention of
personal injury and property
damage.
Precaution symbol with information
on prevention of harm / damage.
Connect the machine to the power
supply.
Ø (mm): (U/min):
2650
< 4
1800
1300
900
600
Pull out the mains plug.
Notice symbol with information on
how to handle the device properly.
Caution! Hot surface. There is a
risk of burns.
Steel
Wood
General Safety Directions
for Power Tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock, fi re and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool).
1) WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite ac-
cidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of fl ammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders
away while operating a power
GB IE
25