Switching On/Off The Interior Light; Switching On/Off The Sound; Setting The Anti-Crease Feature; Activating And Deactivating The Button Lock - hanseatic HWT8A2GT Gebrauchsanleitung

Page EN-16 Setting options
1. Select your desired cycle.
2. Repeatedly press the "Drying intensity"
button (15) until the desired drying inten-
sity is set.
3. Press the "Start/Pause" button (8) to begin
the cycle.
The drying cycle starts.
Switching on/off the interior
light
• To switch the interior light on, press the "In-
terior light" button (12).
The interior light will switch on. The indica-
tor will appear on the display (11).
The interior light will automatically switch
off after approx. 3 minutes.
• To switch the interior light off, press the "In-
terior light" button (12) again.
The interior light can also be switched off
by pressing the "On/Off" button (7).
The interior light also switches on if
the appliance door (2) is opened. It
automatically switches off after ap-
prox. one minute.

Switching on/off the sound

By default, the appliance will play sounds
when the appliance is switched on or off,
when the cycle selector is turned, the mode
buttons are pressed, or the drying cycle is
complete. You can switch off this feature.
• To switch the sound off, press the "Buzzer"
button (13).
The indicator will disappear from the
display (11).
• To switch the sound on again, press the
"Buzzer" button (13) again.
The indicator will appear on the dis-
play (11).
The setting disappears when the ap-
pliance is switched off; i.e. it will acti-
vate again once the appliance is
switched on the next time.
Setting the anti-crease
feature
The "Anti-crease" mode helps ensure laundry
items are crease-free after the drying cycle.
By default, the anti-crease phase will run for
30 minutes after the drying cycle. The dura-
tion can be increased to up to 120 minutes.
The laundry items can be removed
during the anti-crease phase.
The "Anti-crease" mode cannot be
set for the "Cool", "Airing" and "Wool" cycles.
• To activate the "Anti-crease" mode, press
the "Anti-crease" button (14).
The indicator will appear on the dis-
play (11).
• To deactivate the "Anti-crease" mode,
press the "Anti-crease" button (14) again.
The indicator will disappear from the
display (11).
Activating and deactivating
the button lock
The appliance features a button lock to pre-
vent, for example, children from unintention-
ally pressing buttons and thus disrupting the
drying cycle.
The button lock can only be activated
when a cycle is already running.