Switching On/Off The Interior Light; Activating/Deactivating Sound; Setting The Anti-Crease Feature; Activating/Deactivating Child Lock - hanseatic HWT8A3GT Gebrauchsanleitung

Switching on/off the interior
light
• Press the button for interior light (10) to
switch the interior light on or off .
The drum's interior light will stay on for
around 3 minutes after being switched on .

Activating/deactivating sound

By default, the dryer will play sounds, e .g .
when the cycle selector is turned, the settings
buttons are pressed, or the drying process is
complete .
• Press the button for the buzzer (11) to
activate or deactivate the sound function .
Setting the anti-crease
feature
This feature helps ensure clothes stay crease-
free after the drying process . By default, the
anti-crease phase will run for 30 minutes af-
ter the drying process . The duration can be
increased up to 120 minutes .
The laundry can be removed during the an-
ti-crease phase .
The anti-crease feature can be set for all
cycles except for Cool, Airing and Wool .
• Press the button for anti-crease (12) to
set the anti-crease feature .
Available settings
Activating/deactivating child
lock
The dry has a special child-lock feature that
prevents children from unintentionally press-
ing buttons and interrupting the drying pro-
cess . The child lock can be activated only
when a cycle is already running .
• To activate the child lock, press and hold
both the button for anti-crease (12) and
the button for the buzzer (11) simultane-
ously for 3 seconds .
The symbol for child lock will appear on the
display . All buttons and the cycle selector
will be disabled, with the exception of the
On/Off button (1) .
• To deactivate the child lock, press and
hold both the button for anti-crease and
the button for the buzzer simultaneously
for 3 seconds again .

Customised settings

This feature allows you to save a custom-
ised cycle that you use often and want quick
access to .
1 . Select your desired cycle and adjust any
additional settings as required .
2 . To save the cycle and settings, press and
hold the button for the interior light (10) for
3 seconds .
The symbol for the customised setting will
flash on the display .
3 . To select the customised cycle later, turn
the cycle selector (4) to the position "Cus-
tomised" .
4 . To change the customised settings,
repeat steps 1 and 2 .
Page EN-17