Parkside PMML 5 A2 Bedienungs- Und Sicherheitshinweise Seite 37

AC WIRE = live electric power cables,
METAL = metal).
1. Slide the function switch
"MEAS / DETECT" mode. The
display
display
press the POWER button
on the display
2. Press the AC WIRE button
STUD button
Respective mode arrow
display
the right material.
3. First of all, the product must be
calibrated. Place it flat against the
wall where you wish to search for
concealed objects.
4. Press and hold the PUSH button
until the signal tone hums. The product
has now adjusted itself to the wall
thickness. Continue to keep the PUSH
button
5. Move slowly along the wall with the
product. As the detecting intensity
arrows
closer to the center of the display,
will be turned on. If the
2
is not turned on, briefly
2
.
2
or METAL button
3a
will be correctly indicating
2
pressed down (see fig. B).
14
in the display
23
to
9
to turn
12
or
3
3b
on the
17
14
move
2
GB/IE/NI
.
37