Locating Concealed Objects; Tips On Measurement - Parkside PMML 5 A2 Bedienungs- Und Sicherheitshinweise

Locating concealed
objects
Hints: Before using the product for this
task, first test it by locating a metal pipe-
line or electrical power cable at a known
position.
In cases of doubt, always ask a qualified
building contractor.
Attention!
Should the product find a live wire
carrying alternating current, ( ) high
voltage warning symbol
in the display
should you drill at this location! Danger
of electric shock!

Tips on measurement

- The PUSH button
pressed during the entire search process
(calibration and search) (see fig. B).
- If you calibrate too closely to the object
or directly on the object, the calibration
can fail. If the calibration fails, the display
shows the full intensity and a long beep-
ing tone sounds or can't search any object
in the wall. Move and hold the device
34 GB/IE/NI
19
. Under no circumstances
2
should be remain
14
will appear