Parkside PMML 5 A2 Bedienungs- Und Sicherheitshinweise Seite 33

2. Press the Memory button
symbol "M+"
display
saved now.
3. Press the MODE button
product is now ready for the second
measurement.
4. Measure the next volume as described
in the section "Measuring volumes".
5. Press the Memory button
The result of the first measurement
will be shown and blinking in the
lower row
6. Press the + / = button
measurements are added and the
result is shown in the lower row
of the display
7. Repeat steps 2 to 6 to add further
measurements.
8. Press the MODE button
the addition mode. All the measure-
ments will be cleared.
will appears in the
24
. The measured volume is
2
of the display
21
.
2
. Saving
4
. The
10
again.
4
.
2
again. Both
7
21
to leave
10
GB/IE/NI 33