Accessories, To Be Ordered Separately; Scale Commissioning Overview - HBM DIS2116 Kurzanleitung

8
• 4 mounting elements for panel mounting
For DIS2116 panel mounting, the cut guides are bent outward for fitting the
mounting elements. Then, the set screws are used for clamping the housing
to the panel.
• SD card (1 Gbyte) installed in DIS2116
• Quick start guide
• System CD, 1-DIS2116-DOC

3.2 Accessories, to be ordered separately

• Power pack, AC/DC 15 V / 530mA (for max. 8 load cells)
• Desktop housing, also for wall mounting, 1-TG2116 (for Dim. see Chap. 14.2)
• Junction box VKD2R-8
• Cable (connection cable for C16i)
4

Scale commissioning overview

The permissible supply voltage for the DIS2116 is in the range of +10...30 V
and must be adequately smoothed (rms value less residual ripple >10 V).
NOTE
When the digital load cells, e.g. C16i are supplied via the DIS2116, the per-
missible supply voltage is +10 ... 17 V
A 100...240 V power supply unit is available as an accessory (AC/DC15 V / 530
mA, for max. 8 load cells). This power pack is suitable for all digital load cells.
When properly connected with shielded cables, the DIS2116 complies with the
relevant European standards and carries the CE mark.
A formatted SD card with the parameters of the factory setting is inserted in
the device.
HBM
DC
DIS2116
DC
A2540-1.1 en/de