Prior To Mounting - HBM Z6AM Montageanleitung

4

Prior to mounting

S Care should be taken to ensure that all surfaces for siting and mounting are
clean, smooth and level. Depending on the mounting conditions, any level­
ing error can be compensated for by using suitable wedges and compensa­
tion plates (permanently welded) or by grinding away the mounting surface,
for example. On no account must the module plates be ground.
S The base or foundation frame must be sufficiently rigid to prevent unaccept­
able deformation under load (such as sagging).
S In order to keep the mounting as free of constraining forces as possible, the
fastening holes on the foundation frame and container joint must be suitably
aligned.
S Every effort should be made to ensure uniform loading on the support
points. Care should be taken to adjust the height on the support points cor­
rectly (compensating shims need to be available). This is especially impor­
tant in the case of statically undefined supports.
Z6AM
A01559_03_Y00_00 HBM: public
Prior to mounting
7