Accessories, To Be Ordered Separately; 10.1 Scope Of Delivery - HBM C16M Serie Montageanleitung

Accessories
10

Accessories, to be ordered separately

Each for two weighing modules (see Dimensions):
1-ZAC16/MSL40T, for C16/MSL20 t...40 t, consists of:
1 piece threaded rod M20x1000
6 pieces hexagonal nut M20 DIN 934, galvanized
2 pieces washer DIN 9021, ∅21 mm, galvanized
1-ZAC16/MSLR40T, for C16/MSLR20 t...40 t, consists of:
1 piece threaded rod M20x1000
6 pieces hexagonal nut M20 DIN 934, stainless steel
2 pieces washer DIN 9021, ∅21 mm, stainless steel
1-ZAC16/MSL60T, for C16/MSL60 t, consists of:
1 piece threaded rod M30x1000
6 pieces hexagonal nut M30 DIN 934, galvanized
2 pieces washer DIN 9021, ∅31 mm, galvanized
1-ZAC16/MSL100T, for C16/MSL100 t + 200 t, consists of:
4 pieces threaded rod M30x1000
12 pieces hexagonal nut M30 DIN 934, galvanized
4 pieces washer DIN 9021, ∅31 mm, galvanized
Further accessory
Fixed bearings with the same installation height as the weighing module are
e.g. very helpful as a dummy for installations. Please find further information in
a separate data sheet.

10.1 Scope of delivery

Weighing module complete mounted with stay rod, thrust pieces, ground wire
and load cell C16A.
1)
The threaded rods have to be adapted to the corresponding installation conditions on the cus­
tomer side.
18
1
), galvanized
1)
, stainless steel
1)
, galvanized
1)
, galvanized
A01268_04_XS0_00 HBM: public
C16M...