17.2 CLA60 clamp transformer
Clamp opening .............................................. 25 mm
Maximum conductor diameter ....................... 20 mm
Measurement function ................................... DC, AC True RMS
Output ............................................................ 10 mV/A
Test lead length ............................................. approx. 120 cm
Power supply voltage .................................... 2x AAA 1.5 V batteries
Operating conditions ...................................... 0 to +40 °C (<75% RH)
Operating altitude .......................................... max. 2000 m above sea level
Storage temperature ...................................... -10 °C to +50 °C
Weight ........................................................... approx. 184 g
Dimensions (L x W x H) ................................. 195 x 50 x 29 mm
Measuring category ....................................... CAT III 600 V
Pollution degree ............................................. 2
Safety regulations ......................................... meets EN 61010-1
Measuring tolerances
Accuracy in ± (% of reading + display error in counts (= number of smallest
points)). These accuracy readings are valid for one year at a temperature of +23 °C
(± 5 °C) and a relative humidity of less than 75 % (non-condensing). If the mul-
timeter is used outside of this temperature range, use the following coefficient to
calculate the accuracy. +0.1 x (specified accuracy)/1 °C.
The accuracy of measurements may be affected when the multimeter is used in a
high-frequency electromagnetic field.
103