Replacing The Battery - PeakTech 4955 Bedienungsanleitung

process then starts automatically when the battery is inserted.
This is represented by a filling battery icon in the top right corner
of the screen.
9.3. Charging the battery via the PC
If the measuring device is connected to a switched-on PC using
the supplied USB cable, the Li-Ion battery is automatically
charged. This also happens during the data transfer to the PC.
The charging time depends on the current of the USB port and
varies between USB 2.0 and 3.0.

9.2 Replacing the battery

Under normal conditions, it is not necessary to replace the lithium-
ion battery. However, if this should become necessary, the
replacement can only be carried out by qualified personnel; a Li-
ion battery with the same technical data must be used.
Li-Ion battery used:
Type: 18500
Capacity: 1400 mAh
Rated voltage: 3.7 V
Watt hours: 5.1 Wh
62