6.20. System Upgrade
This function allows you to import
new firmware from an SD card. Press
the ENTER key to enter. If there is
new firmware on the SD card, it will
be updated automatically. Press the
ESC key to cancel.
ATTENTION: This function is only to
be carried out in consultation with or
by
the
service
department
of
PeakTech. Incorrect operation may
result in damage to the unit!
7. Function
In any mode, press the ENTER key to enter the menu. When the
"DATALOGGER" mode is entered, there is an additional setting
"Logs Time".
50