PeakTech 4955 Bedienungsanleitung Seite 58

7.11. Type-K Temperature Colour
In this function, select the colour of
the display
measurements.
- Press Enter to open the colour
selection
- Font colour
Laser
Press the ENTER key to activate or deactivate the display and
ESC to save and exit the function.
Note: If a type-K sensor is connected, the display is activated
automatically and can be deactivated again via this function.
7.11. Measuring interval
Select the sampling rate for data
logger measurements
function.
- Press Enter to open the
measurement interval (Logs Time)
Laser
▲and ▼
Press the
value.
Press the ENTER key to confirm and ESC to save and exit the
function.
for the TYPE-K
in
buttons to set the
this
57