2.3
Safety clearances
For all objects, such as furniture, net curtains, curtains, textiles or other flammable or non-flammable materials, the following
minimum clearances from the appliance, particularly the air outlet grille, must be maintained:
(see also chapter "Specification")
Minimum clearances
To the air outlet grille
To the sides of the appliance
To the top of the appliance
To the bottom of the appliance
To the appliance back panel
To the socket
The hot air must be able to escape unimpeded.
2.4
cE designation
The CE designation shows that the appliance meets all the essential requirements:
º
Electromagnetic Compatibility Directive (Council Directive 2004/108/EC)
º
Low Voltage Directive (Council Directive 2006/95/EC)
3.
Appliance description
The appliance is an electric direct heater for installation on a wall. It is suitable as e.g. a full heating system in bathrooms,
or for use between seasons and use as a booster heater in smaller rooms, such as hobby and guest rooms.
For heating, the room air is drawn in by the appliance fan via apertures in the back panel, heated by the heating element,
and blown out evenly, without sensation of a draught, via the air outlet grille at the bottom of the appliance.
Air outlet grille
3.1
Standard delivery
º
Rapid wall mounted heater with power cable and profiled plug
º
Wall retainer
º
Screws and rawl plugs
º
Operation and installation instructions
500 mm
100 mm
200 mm
100 mm
26 mm
100 mm
Operation - for users
19