AEG WSP 600 HF Gebrauchs- Und Montageanweisung Seite 25

Remove the top front panel (Fig. 4):
Caution: Before removing the top front
panel of heaters with integral room
thermostats, first remove the cables
from the rocker switch on the
operating panel.
8. Remove the top and the side left and right
screws from the top front panel (C).
9. Remove the top front panel with both top
front insulations.
Insert the channelled bricks using the guide plates
provided:
10. Insert the channelled bricks SP27 (Fig. 5).
11. Replace the top front panel with both top
front insulations.
12. Insert the channelled bricks from SP26.
You will find the number and type of storage
brick packs in the section "Technical Data".
Note: Position the top row of the
channeled bricks with the bevelled
channeled guide facing upwards.
Insert the heating elements into the rows of
slots in the storage core.
Place the cover bricks on to the channel
bricks over the heating elements in such a
way that the terminals of the heating
elements lie sidewards on the channels of
the cover bricks. Remove the guide plates.
8.
Fig. 4 Remove the top front panel
Fig. 5 Insert the channelled bricks SP27
Fig. 6 Heating elements and cover bricks
For the Fitter
C
8.
8.
25