Calling Up System Information; Start The Update - Hella Gutmann mega macs X Bedienungsanleitung

Hella Gutmann
• The mega macs X is connected to the Internet via LAN or Wi-Fi respectively.
• The corresponding licenses of Hella Gutmann are activated.
• The voltage supply of the mega macs X is ensured.

8.6.2. Calling Up System Information

Here you can find all information required for the identification of the mega macs X.
Proceed as follows to call up system information:
1. Select > Settings > Device.
2. Select the tab >Version<.
ð Here you can find information such as the hardware version, package version and the device number.

8.6.3. Start the update

Here you can start a system update.
Proceed as follows to start the system update:
1. Select > Settings > Device > Version.
2. Select >Start update<.
NOTICE
Insufficient voltage supply / loss of system data
Do not switch off the diagnostic device during the update and do not disconnect it from voltage supply.
Ensure sufficient voltage supply.
ð The device searches for a new update that will then be downloaded and installed.
ð The diagnostic device switches off and on again automatically after the successful system update. The installation will
be checked automatically after startup.
mega macs X
Configuring the mega macs X | 8.
143